Private Utility Locating in Austin: Street Cable Route

Nov 20, 2026By Nick Clawson

A contractor getting ready to replace a cable line along a residential street in west Austin needed every utility in the work area found and marked first, including the stretch where a temporary cable was running. Electric, communication and water all shared the same narrow strip along the curb. Here is how our team handled it.

The project

The work area was the street frontage in front of one home on a hillside residential street in west Austin, where the cable line will be replaced, plus the area of the temporary cable. The strip between the curb and the slope is rocky grass with pedestals, a transformer and telecom handholes along it, and the street pavement runs right up to it.

The scope: mark out utilities in the area where the cable line will be replaced and in the area of the temporary cable. With power, cable TV, telephone, fiber and water all running through that strip, the crew needed to know what was there before any trenching started.

Our approach

Our technician worked the frontage in a single visit in early October 2026 using electromagnetic (EM) locating with a Radiodetection RD8200SG locator. Every located utility was marked on site with paint and flags across the grass strip and the street, then mapped with GPS so each line and structure has a position on the map: the transformer, the cable TV and telephone pedestals at two pedestal clusters, and two telecom handholes.

Where the signal on a line was weak, the technician did not guess. Those spots were recorded as separate points on the map and flagged for follow-up inspection.

What we found

  • Electric: a transformer at the frontage with about 29 ft of electric cable, plus about 17 ft of electric cable at the east pedestal cluster.
  • Communication: about 37 ft of cable TV line, 48 ft of telephone cable and 39 ft of fiber at the west and east pedestal clusters and the telecom handholes.
  • Water: about 207 ft of water line along the street and a 10 ft service stub to the north.
  • Weak signal on water: three spots along the water line gave a weak signal and were flagged as needing inspection. Our technician recommended potholing the water line to confirm its position before excavation.

Lengths are approximate and measured along the mapped linework. The marks on site are the reference, and 811 should still be called before digging.

Deliverables

  • Utilities marked on site with paint and flags.
  • An 11x17 PDF map sheet with a detail map over aerial imagery, project information, a legend, the findings and a feature schedule.
  • A KMZ file for Google Earth with the lines and points by utility, plus the fitted base map.
  • A written report in Word and PDF.

What a weak signal tells the crew

A weak signal does not mean a line is missing. It means its position is less certain than the lines around it, and depth readings on that stretch are even less reliable. Flagging those spots on the map, instead of painting a confident line through them, tells the crew exactly where to slow down. The safe move is to expose the line by hand or with vacuum excavation and potholing before a trench crosses it. Our post on how electromagnetic utility locating works explains why signal strength varies from line to line.

Replacing a cable line along a street in Austin?

Our private utility locating crews mark electric, communication and water in the work area, and our GPS utility mapping turns the marks into a map and KMZ your team can keep. See our Austin utility locating page, read the Austin courtyard cable route write-up, or browse more utility locating projects across Texas.