Private Utility Locating in Richardson: Apartment Fiber
Before a telecom contractor could run new fiber through an apartment community in Richardson, in the north Dallas area, every existing utility in the work area had to be found, marked and mapped. Here is how our team handled it and what the crew walked away with.
The project
The property has about 30 residential buildings with carports and garages, served from the main road on its north side. The new fiber would cross parking drives, lawns and walkways between buildings, so the contractor asked us to locate all utilities across the complex, mark them on site and map the results before any trenching or boring started.
Our approach
Two SiteTwin technicians covered the complex in one day in October 2026. They used electromagnetic (EM) locating with a Radiodetection locator, working by direct connection, induction and passive sweeps wherever access allowed. Every located utility was marked on site with paint and flags.
The marks were then mapped with GPS: shots along each line, plus utility points such as pad-mounted transformers, meters, pedestals, street lights and a water valve. Site photos with time, position and heading stamps document the marks, so the crew can match what is on the map to what is on the ground.
What we found
In total, about 6,639 ft of line work and 82 utility points were mapped:
- Electric: 31 line segments (about 2,282 ft), 17 pad-mounted transformers, 11 electric meter locations and 6 street lights.
- Telecom (phone): 19 line segments (about 2,121 ft) with 19 telecom pedestals.
- Cable TV: 16 line segments (about 1,907 ft) with 16 CATV pedestals.
- Water: 6 line segments (about 330 ft), 7 water meter locations and 1 valve.
Not located: the water service lines running from the meters to the apartment buildings could not be located. Our technicians recorded five weak-signal / unlocatable points next to the water meters and put them on the map, so the fiber crew knows exactly where the gaps are instead of assuming those areas are clear.
Lengths are approximate and measured along the mapped line work. Line and point numbers on the map sheet match the KMZ, which makes it easy to talk through a specific crossing with the field crew.
Deliverables
- Utilities marked on site with paint and flags
- 11x17 PDF map sheet with a detail map, legend, findings, feature schedule and a 32-photo log
- KMZ file for Google Earth with the line work, utility points and site photos
- Written report (Word and PDF)
Planning work on a multifamily property?
Fiber, conduit and other underground upgrades on apartment properties go faster when the crew has both marks on the ground and a map in hand. See our private utility locating services and GPS utility mapping, or visit our Dallas utility locating page for work across DFW. You can find more examples on our utility locating projects page.
